Attaching A Network Cable - Lexmark T630 Setup Manual

Note:
If you see a message
other than Ready on the
display, refer to the
Publications CD for
instructions on clearing the
message. Look for
information about
understanding printer
messages.
Parallel
Serial
Attaching a
network cable
Ethernet
4
Turn on your computer and any other peripherals.
5
Go to "Install drivers for local printing" on page 44.
A parallel port is included on some printer models, and is available for
other printers on an option card. See "Installing an option card" on
page 34 for more information.
A parallel port requires an IEEE-1284 compliant parallel cable such as
Lexmark part number 1329605 (3 m [10 ft]), or 1427498 (6 m [20 ft]).
Serial ports are available when you install a serial interface option
card. See "Installing an option card" on page 34 for more information.
A serial port requires a compatible serial cable such as Lexmark part
number 1038693.
You can attach your printer to a network using standard network
cables.
A 10BaseT/100BaseTx Fast Ethernet port is standard on the network
model.
Attach cables
42