Removing The Software - Sun Microsystems XVR-1200 Installation And User Manual

8. Boot your system at the ok prompt:
Halt (Stop-A) your system for the ok prompt.
ok boot -r
Note – After you complete the basic installation and configuration of your system,
you can use the Sun Install Check Tool to check proper patches, software levels, and
so on. Download tool at:
http://www.sun.com/software/installcheck/index.html

Removing the Software

1. Log in as superuser.
2. Insert the Sun XVR-1200 graphics accelerator CD into the drive.
If the drive is already mounted, type the following, and go to Step 4:
# cd /cdrom/cdrom0
If the CD is not already mounted, type:
# mount -F hsfs -O -o ro /dev/dsk/c0t6d0s0 /cdrom
# cd /cdrom
3. To remove the Sun XVR-1200 graphics accelerator software, become superuser and
type:
./remove
#
The following list of options is displayed:
1) Remove Sun XVR-1200 Graphics Accelerator support
2) Remove Sun OpenGL
3) Remove All (Sun XVR-1200 Graphics Accelerator and Sun OpenGL)
4) Quit
Select an option:
Chapter 2 Installing the Sun XVR-1200 Graphics Accelerator Software 17