To Remove The Slide Rails From The Tray; Figure 2-5 Removing The Slide Rails - Sun Microsystems StorEdge L1000 User Manual

To Remove the Slide Rails from the Tray

1. Place the slide assembly on a table. Provide enough room to fully extend the slide
rails.
2. Extend both slide rails all the way out of the slide assembly.
3. Press the outer tabs to release the slide rails (
4. Remove the slide rails from the tray.
Tab
Tray
FIGURE 2-5
18 Sun StorEdge L1000 User's Guide • May 1998
Slide rails
Removing the Slide Rails
FIGURE 2-5
TH00065a
Tab
).