Removing Microsoft Windows Software; How To Proceed - Sun Microsystems SunPCi II 2.3 User Manual

Note – Microsoft Windows help does not contain help for the SunPCi II application.
For help on the SunPCi II application software, use the Solaris manual pages
described in the previous section, or consult "Using SunPCi II Software" in
Chapter 11 of this guide.
For help in your Microsoft Windows application software, consult the application
user interface, the documentation that accompanied the application, or consult
Microsoft directly.

Removing Microsoft Windows Software

To remove Microsoft Windows software from an emulated drive, consult your
Microsoft Windows documentation.

How to Proceed

Note – Installation of Microsoft Windows on your UltraSPARC system for use with
the SunPCi II card differs from installation on a PC. Even though you may have a
strong understanding of Microsoft Windows installation instructions, it is critical
that you follow the instructions in this guide.
To get started with the SunPCi II 2.3 software configuration, proceed to Chapter 2.
To configure and use multiple cards with the SunPCi II 2.3 product, proceed to
Chapter 3.
Before configuring your network connections, read about SunPCi II 2.3
networking options in Chapter 4.
Once you have installed and configured the SunPCi II hardware and software, you
can install one or more supported version of Microsoft Windows. The easiest way to
do this is to choose an operating system to install when you choose the Create a
New Emulated Drive from the SunPCi Options menu. See Chapter 2 for instructions.
See the following chapters for additional information about configuring and using
each operating system, and for performing upgrades and custom installations.
Chapter 5—Windows XP
Chapter 6—Windows 2000
Chapter 7—Windows NT
Chapter 8—Windows ME
Chapter 9—Windows 98 SE
Chapter 1 Introducing SunPCi II Version 2.3 Hardware and Software 7