Figure 3-4 Removing The Rear Brackets And Rear Wheel Stop And Positioning Ramps - Sun Microsystems Sun Fire Cabinet Installation And Reference Manual

3. Reinstall the front wheel stop.
The front wheel stop prevents the cabinet from inadvertently rolling off the front of
the shipping pallet.
4. Remove the rear wheel stop (
5. Position the ramps so the metal tab connects to the holes on the rear of the
shipping pallet.
6. Use the leveling wrench to remove the rear brackets. Save the brackets for Step 11.
Rear wheel stop
Rear brackets
FIGURE 3-4
7. Use the leveling wrench to raise the leveling pads as high as they will go so the
cabinet is free to move.
8. Secure the leveling wrench back in the cabinet with the plastic strap and close the
front and rear doors.
3-4 Sun Fire Cabinet Installation and Reference Manual • October 2001
Ramps
Removing the Rear Brackets and Rear Wheel Stop and Positioning Ramps
).
FIGURE 3-4