Power Button Is Not Lit; Software Does Not Install - Lexmark 350 Series Manual

6
Press or repeatedly until the language you want appears on the display.
7
Press to save your selection.

Power button is not lit

Make sure you have disconnected the power supply cord from the printer and then from the wall outlet.
1
Plug the cord all the way into the power supply port on the printer.
2
Plug the cord into an electrical outlet that other electrical devices have been using.
3
If the light is not on, press

Software does not install

The following operating systems are supported:
•
Windows 2000
•
Windows XP
•
Windows Vista
•
Mac OS X version 10.3 or later
S 1
OLUTION
1
Close all open software applications.
2
Disable any anti-virus programs.
3
Remove the printer software CD from the CD-ROM drive.
4
Restart the computer.
5
When the desktop appears, reinsert the printer software CD. The CD icon is created on the desktop.
6
Follow the instructions on the computer screen to install the software.
S 2
OLUTION
1
Remove the printer software CD.
2
Restart the computer.
3
When the desktop appears, cancel all Found New Hardware windows.
4
Reinsert the printer software CD.
5
Follow the instructions on the computer screen.
.
10