Troubleshooting; Setup Troubleshooting; Power Button Is Not Lit; Software Does Not Install - Lexmark Z1420 Getting Started

Troubleshooting

Setup troubleshooting

Power button is not lit

These are possible solutions. Try one or more of the following:
Press power button
Make sure the printer is on by pressing
Disconnect and reconnect the power cord
1
Disconnect the power cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply on the printer.
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the light is not on, press

Software does not install

These are possible solutions. Try one or more of the following:
Check your operating system
The following operating systems are supported:
•
Windows 2000 with Service Pack 3 or later
•
Windows XP
•
Windows Vista
•
Mac OS X
Check your system requirements
Check that your computer meets the minimum system requirements listed on the printer box.
Check your USB connection
Follow these steps if you are not using the printer on a wireless network:
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
.
1
.
34
2