General Directions For Use - Toyotomi KS-53 Operating Manual

GENERAL DIRECTIONS FOR USE

Below you will find the main steps to be taken for using your
heater. For more details, please refer to the MANUAL.
1
Remove all packaging materials (refer to Section A).
2
F i l l t h e f u e l t a n k
ignite the heater (refer to Section B, Fig. F).
3
Insert the batteries into the battery holder µ
(refer to Section A, Fig. D).
4
Check whether the combustion chamber
(refer to Section C, Fig. J).
5
Ignite the heater by turning the wick adjuster knob · as far to
the right as possible (refer to Section C, Fig. H).
6
Prior to adjusting the flame (refer to Section D), let the heater
heat up for 30 minutes.
7
Switch off the heater (refer to Section E).
• As a fire precaution, the tank must be filled either when the heater has
been turned off or in another place than the place where the heater is
installed.
• Always ensure that the tank is closed properly after filling it at a safe dis-
tance from all sources of heat and open flames (see Section B).
• The first time you ignite your heater it will smell like 'new' for a short time.
• Store all fuel containers with their original caps and seals in a cool and dark
place.
• Fuel ages. Use new fuel at the start of every heating season.
• Only use high quality and water-free pure paraffin in accordance with local
legislation (TOYOTOMI fuel).
• Before changing brands and/or types of fuel make sure that the mobile
heater first completely empties all of the remaining fuel inside the heater.
a n d w a i t 3 0 m i n u t e s b e f o r e y o u
is fully upright
4
3