For example, notice that the first 3 bytes of these two commands are the same:
ESC
(s10H
ESC
(s4099T
To combine these two commands, use this form:
ESC
(s10h4099T
which is 3 bytes shorter than the long form:
ESC
(s10H
You can combine more than two commands; for example, you can add Select Stroke
Weight Bold (
ESC
(s10h3b4099T
or in the long form:
ESC
(s10H
PCL Emulation Commands
See the following tables for a listing of the commands grouped by function.
To determine which commands your printer supports, see "Table A-1: PCL Emulation
Commands" on page A-1.
PCL Emulation Commands by Function
Table 2-15: Job Control
Command / Parameters
ESC
E
ESC
&d#A
0 = Collation off
1 ... 999 (number of Copies)
Select 10 characters per inch
Select Courier typeface
ESC
(s4099T
ESC
) to the previous two commands:
(s3B
ESC
ESC
(s3B
(s4099T
Function / Result
Printer Reset
• Prints any partial pages.
• Resets printer environment to defaults.
• Deletes all temporary downloaded resources.
Number of Collated Copies
Turns collation of pages off or sets the number of collated copies.
2-51
PCL