Command Structure; Control Codes - Lexmark X644E Technical Reference Manual

Table 2-12: X642e, X644e, X646e, X850e, X852e, and X854e ISO PCL Emulation
Symbol Sets (Continued)
Symbol Set ID
1F
2U
0F
0G
0K
2K
3S
1S
6S
4S
5S
1D

Command Structure

This section introduces the different types of PCL emulation commands and their
structure, or syntax. It also demonstrates how you can link commands to abbreviate
them.

Control Codes

Control Codes are single-character instructions.
Table 2-13: Control Codes
Code Dec Hex Function
BS 8 08 Backspace
HT 9 09 Horizontal Tab
LF 10 0A Line Feed
FF 12 0C Form Feed
Symbol Set / Typeface
ISO 69: French
ISO 2: IRV (International Ref Version)
ISO 25: French
ISO: HP German
ISO 14: JIS ASCII
ISO 57: Chinese
ISO 10: Swedish
ISO: HP Spanish
ISO 85: Spanish
ISO 16: Portuguese
ISO 84: Portuguese
ISO 61: Norwegian Version 2
Result
Moves the cursor toward the left margin one horizontal space equal to
the last printed character
Moves the cursor to the next defined tab stop
Advances the cursor to the same horizontal position on the following line
as determined by either the Vertical Motion Index (VMI) or Set Line
Spacing command
Advances the cursor to the same horizontal position at the top margin of
the next page
2-48
PCL