Re-Locking a Protected File or Device
Use the LDELETE command to re-lock a -protected file or device that has been
unlocked using the LDECLARE command.
If an LRESOURCE is not specified, all unlocked files or devices are re-locked.
Syntax:
@PJL LDELETE [LRESOURCE : "device:filename.filetype"][<CR>]<LF>
LRESOURCE : "device:filename.filetype"
Values for "
device:filename.filetype
,
device
flash
flash1
A unique identifier for a file, such as the macro ID for a PCL
filename
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
An identifier that categorizes the file, such as
filetype
macros or
beginning on page 3-87 for a complete list of the supported
filetypes. The
3-96
" are:
,
, or
(case insensitive)
disk
disk1
for PCL symbol sets. See the table
p5symset
is case sensitive.
filetype
PJL
is case
filename
for PCL
p5macro