Lexmark X5470 User Manual page 160

C D P
HECK THE IAL REFIX SETTING
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Dialing and Sending appears.
6
Press .
7
Press or repeatedly until Dial Prefix appears.
8
Press .
9
To change the setting, press
10
Press .
11
Enter the prefix to be dialed before each telephone number.
12
Press .
C S D
HECK PEED IAL NUMBER
•
Check to make sure Speed Dial has been programmed for the number that you want to dial. See "Setting up
Speed Dial using the computer" on page 66.
•
You can also dial the telephone number manually.
B
E SURE THAT PRINTER IS DETECTING A DIAL TONE
•
See "Sending a fax while listening to a call (On Hook Dial)" on page 63.
•
Check the Dial Method setting.
1
Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not
recognize the dial tone.
2
From the control panel, press Fax Mode.
3
Press .
4
Press or repeatedly until Fax Setup appears.
5
Press .
6
Press or repeatedly until Dialing and Sending appears.
7
Press .
8
Press or repeatedly until Dial Method appears.
9
Press .
10
Press or repeatedly until Dial Behind PBX appears.
11
Press to save this setting.
or repeatedly until Create appears.
Troubleshooting
160