Scanning; Scanning A Document; Scanning To A Computer Over A Network - Lexmark X3550 User Manual

Scanning

Note: If you want to customize scan settings, see "Using the Scan menu" on page 20.

Scanning a document

1
Make sure the printer is connected to a computer, and both the printer and the computer are on.
2
Load an original document facedown on the scanner glass.
3
From the control panel, press Scan Mode.
4
Press or repeatedly until the destination to which you want to scan appears.
5
Press Start Color or Start Black.
6
If you are using a Macintosh operating system, you may need to click Scan from the Scan dialog on the computer
screen.
7
If you want to save the scanned image, from the software application, click File
8
Enter the file name, format, and location where you want the scanned image saved.
9
Click Save.

Scanning to a computer over a network

1
Make sure:
•
The printer is connected to the network through a print server, and the printer and computer receiving the
scan are on.
•
The printer is configured to scan over a network (Direct IP Printing).
2
Load an original document facedown on the scanner glass.
3
From the control panel, press Scan Mode.
4
Press or repeatedly until the computer to which you want to scan is highlighted.
5
Press .
63
Save As.