Copying Photos; Making Borderless Copies Using The Control Panel - Lexmark X3550 User Manual

Copying photos

1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.)
2
Place a photo facedown on the scanner glass in the upper left corner. For more information, see "Loading original
documents on the scanner glass" on page 37.
3
From the control panel, press Copy Mode.
4
Press .
5
Press or repeatedly until Quality appears.
6
Press .
7
Press or repeatedly until Photo appears.
8
Press .
9
Press or repeatedly until Paper Setup appears.
10
Press .
11
Press or repeatedly until Paper Size appears.
12
Press .
13
Press or repeatedly until the size you want appears.
14
Press .
15
Press or repeatedly until Paper Type appears.
16
Press .
17
Press or repeatedly until the type of paper loaded into the printer appears.
18
Press .
19
Press Start Color or Start Black.

Making borderless copies using the control panel

1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.)
2
Place a photo facedown on the scanner glass in the upper left corner. For more information, see "Loading original
documents on the scanner glass" on page 37.
3
From the control panel, press Copy Mode.
4
Press .
5
Press or repeatedly until Resize appears.
6
Press .
7
Press or repeatedly until Borderless appears.
58