Cache Module For Onboard Controller (B120I) - HP HPE ProLiant ML350e Gen8 Maintenance And Service Manual

Remove the optical drive.
12.
To replace the component, reverse the removal procedure.

Cache module for onboard controller (B120i)

To remove the component:
Power down the server (on page 24).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Unlock the front bezel (on page 25).
3.
Place the server on its side.
4.
Remove the access panel
5.
If installed, remove the PCI air baffle
6.
Remove any PCI cards installed in PCI slots 3, 4, 5, and 6
7.
40).
Disconnect the capacitor pack cable from the module.
8.
("Access panel" on page 26).
("PCI air baffle" on page 27).
("Full-length expansion
Removal and replacement procedures 37
board" on page