MSI MS-5191 Manual page 47

Description of the item on screen are as follows:
Power Management/APM
Set this option to Enabled to enable the power management features
and APM(Advanced Power Management). The settings are Enabled, Inst-
On(instant-on) or Disabled. The Optimal and Fail-Safe default settings are
Disabled.
Green Monitor Power State
This option specifies the power state that the green PC-compliant
video monitor enters when AMI
after the specified period of display inactivity has expired. The settings are
Off, Standby, Suspend or Disabled. The Optimal and Fail-Safe default
settings are Standby.
Video Power Down Mode
This option specifies the power conserving state that the VESA VGA
video subsystem enters after the specified period of display inactivity has
expired. The settings are Disabled, Standby or Suspend. The Optimal and
Fail-Safe default settings are Standby.
Hard Disk Power Down Mode
This option will specify the power conserving state that the hard
disk drive enters after the specified period of hard drive inactivity has
expired. The settings are Disabled, Standby or Suspend. The Optimal and
Fail-Safe default settings are Disabled.
Standby Time Out
This option specify the length of a period system inactivity while
in Full power on state. When this length of time expires, the computer enters
Standby power state. The settings are Disabled, 1 min, 2 min, 3 min, 4 min, 5
min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min or 15
min. The Optimal and Fail-Safe default settings is Disabled.
®
BIOS places it in a power savings state
3-13
®