MSI MS-5191 Manual page 52

Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can
select the interrupt line for onboard parallel port. We suggest that the user
select the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)
Parallel Port DMA Channel
This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
Keyboard Power On
This function allows you to Enabled or Disabled the Keyboard
Power On.
PowerOn Select
This function allows you to select the item to power on the system.
Onboard IDE
Set this option to enable or disable the on board IDE controller.
CDROM Dual Mode
Set this option to Normal or Turbo.
®
Parallel Port IRQ
7
5
5
3-18