Table of Contents
Advertisement
Installing an option card
The MFP has one connector that supports the following option cards:
•
MarkNet™ N8000 Series internal print server
•
RS-232 Serial Interface Card
•
Parallel 1284-B Interface Card
•
Coax/Twinax Adapter for SCS
Warning:
Option cards are easily damaged by static electricity. Touch something metal such as the MFP frame
before you touch an option card.
1
Locate the card connectors on the system board.
2
Remove the screw and the cover plate, and save them.
3
Unpack the card. Save the packaging materials.
4
Align the connection points on the card with the connector on the system board, and push the card firmly into the
system board connector.
5
Insert the screw saved from the cover plate (or the extra screw shipped with the card).
6
Tighten the screw to secure the card.
Screw
Cover plate
Installing and removing options
Installing an option card
86
Advertisement
Table of Contents
