Table of Contents
Advertisement
OPERATING INSTRUCTIONS
TEMPERATURE CONTROLS
Changing Temperature Controls
Temperature Display is located on inside of left-hand
refrigerator door. To change the temperature, press
and release the REFRIGERATOR or FREEZER pad. To
change the temperature, tap either the REFRIGERATOR or
FREEZER pad until the desired temperature is displayed.
To turn OFF cooling system, press and hold the
REFRIGERATOR and FREEZER pads simultaneously for
3 seconds. When the cooling system is OFF the display
should read OFF.
To turn ON cooling system, press either REFRIGERATOR
or FREEZER pad. The display will show the preset
temperature settings of 37°F (2.77°C) for refrigerator and
0°F (-17.77°C) for freezer. Turning the cooling system off
stops the cooling to refrigerator, but it does not shut off the
electrical power.
removed during installation, remove it now.
NOTE: For optimal temperature performance, we
recommend to avoid placing food items directly at the
SABBATH MODE
Press and hold lock & light (door alarm & icemaker buttons
for non-dispense models) simultaneously for 5 seconds to
enter/exit Sabbath mode.
DOOR ALARM
The door alarm will sound if either door is open for more
than 2 minutes. The beeping sound will stop when you
close the door.
ICEMAKER
Press to turn the icemaker on or off.
LOCK CONTROLS
Press and hold for 3 seconds to lock or unlock the
refrigerator and freezer controls.
RESET FILTER
Press and hold for 3 seconds after replacing the filter to
reset the timer.
We are continuously updating our software please reference online manual for latest functionality.
10
Sabbath Mode will turn off or dim interior lights,
temperature control and advanced features. Compressor
will run on a timed defrost when in Sabbath mode.
Refrigerator
Hold 3 Sec for °F/°C
Recommended: 37 °F
Set Temp
F
Energy Smart
Recommended: 0°F
Freezer
Energy Smart Override
Hold 3 Seconds
Door Alarm
Ice Maker
Lock Controls
Hold 3 Seconds
Reset Filter
Hold 3 Seconds
49-1000572 Rev 3
Advertisement
Table of Contents
