Receiving The Mridc Dimmer; Inspection; Storage; Removing The Mridc Dimmer From The Skid - Leviton MRIDC Owner's Manual

RECEIVING & INSPECTING THE UNIT
INSPECTING THE MRIDC DIMMER
Upon receipt of the unit, visually inspect for shipping damage. If any damage is found, the Purchaser must
contact the Carrier immediately and file a shipping damage claim.
If any damage has occurred that could affect the operation of the unit, please contact Leviton Lighting
Management Systems.
Leviton Technical Support 1-800-959-6004.
STORING
If it is necessary to store the unit for a period of time before it is installed, be sure to place the unit in a clean, dry
area. To prevent excessive dust from accumulating on the unit, it is advisable to protect it by replacing it in the
original container (if possible). If the original container is not available it is recommended that all openings that
lead internally into unit are covered so that dust, water or any other substance cannot enter inside the system.
The unit must be handled at all times with the same care you would give to any piece of precision industrial
equipment.
REMOVING THE MRIDC DIMMER FROM THE PALLET (if applicable)
Please take special care when removing the unit from the pallet and/or container. Proper equipment must be
used when lifting and moving. Safety precautions should be taken. Larger sizes should be lifted with a pallet jack
or a fork lift.
When removing the MRIDC Dimmer from the pallet and/or container, be sure to take proper safety precautions.
Serious injury and/or unit damage can result from not taking proper precautions.
Page 6