Mercedes-Benz E 2008 Series Owner's Manual page 134

mkalafa,
Route guidance active
The following may appear in the multi-func-
tion display:
Distronic* menu
You can read the current Distronic settings in
the Distronic menu ( page 145).
Y
i
Menu overview: ( page 124).
Y
* optional
Version: 2.9.4
Message memory menu
Previous display messages can be called up
in the Message memory menu. You will only
see the Message memory menu if there are
any display messages.
G Risk of accident
The on-board computer only records and
displays messages and warnings from cer-
tain systems. For this reason, you should
always make sure that your vehicle is safe
to drive. You could otherwise cause an acci-
dent by driving an unsafe vehicle.
Switching off the ignition clears the Message
memory except for the highest priority dis-
play messages. The on-board computer will
delete these display messages only after the
reason for the message has been rectified.
i
Menu overview: see ( page 124).
Y
Displaying messages
Use the buttons on the multi-function steer-
ing wheel.
On-board computer
Press the è or · button repeatedly
X
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example: 2 messages.
Press the j or k button to call up a
X
display message.
You can scroll through the display mes-
sages in sequence. The possible display
messages are explained in the "Practical
advice" section ( page 257).
Y
Settings menu
There are two functions in the Settings...
menu: the To reset: Press reset button
for 3 seconds function, which you can use
to reset most settings to the factory settings.
And there are submenus via which you can
make individual settings for your vehicle.
i
Menu overview: see ( page 124).
Y
Use the buttons on the multi-function steer-
ing wheel.
Controls
Z
131