Flat Tyre - Mercedes-Benz E 2008 Series Owner's Manual

mkalafa,
Remove the key from the ignition lock.
X
Fold the wiper arm away from the rear win-
X
dow until it engages.
Turn wiper blade 1 at a right angle to wiper
X
arm.
Press tab 2 and push wiper blade
X
the retainer in the direction of arrow 4.
Remove wiper blade 1.
X
Fitting
Insert the new wiper blade into retainer
X
3 in the opposite direction to arrow
until tab 2 engages.
Make sure that wiper blade
X
correctly.
Turn wiper blade 1 parallel to the wiper
X
arm.
Fold the wiper arm back onto the rear win-
X
dow.
* optional
Version: 2.9.4

Flat tyre

Your vehicle may be equipped with:
a TIREFIT kit (
R
a "Minispare" emergency spare
R
wheel* ( page 255)
Y
1 off
a collapsible emergency spare
R
wheel* ( page 255)
Y
R a spare wheel* (
the MOExtended run-flat sys-
R
tem* ( page 328)
Y
4
Preparing the vehicle
i
1 is seated
Vehicle preparation is not necessary on
vehicles with MOE tyres*.
Stop your vehicle as far away from traffic
X
as possible on solid, non-slippery, level
ground.
Switch on the hazard warning lamps.
X
Firmly depress the parking brake.
X
Vehicles with manual transmission
Shift to either first or reverse gear.
X
page 255)
Y
page 255)
Y
Practical advice
Vehicles with automatic transmission*
Move the selector lever to P.
X
For all vehicles
All occupants must get out of the vehicle.
X
Make sure that they are not endangered as
they do so.
Make sure that no one is near the danger
X
area whilst a wheel is being changed. Any-
one who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.
Switch off the engine.
X
Remove the key from the ignition lock.
X
Place the warning triangle (
X
Y
warning lamps at a suitable distance.
Observe legal requirements.
G Risk of injury
The jack is designed only to raise the vehi-
cle for a short time while a wheel is being
changed.
If you intend to work under the vehicle, it
must be placed on stands.
Flat tyre
page 252) or
Z
317