Mercedes-Benz E 2008 Series Owner's Manual page 198

mkalafa,
ers 6 on front luggage compartment floor
1.
i
You must release both retainers
remove transverse brace 4. To do this,
press the tabs under retainer
i
You can insert loading tray
either the rear or the front luggage com-
partment floor.
Vehicles with a folding bench seat*
TIREFIT, the vehicle tool kit, etc. are located
in the stowage well.
Opening the luggage compartment floor
Handle
1
Luggage compartment floor
2
* optional
Version: 2.9.4
Remove the seat cushion from the folding
X
bench seat (
Pull handle 1
X
6 to
partment floor 2.
6 forwards.
Closing the luggage compartment floor
Fold down luggage compartment floor
X
2 under
and press it down until it locks in place.
Retaining hooks in the boot (Saloon)
There is a hook on the upper edge of the boot,
on which you can hang items such as bags.
Tab
1
Hook
2
Pull down hook
X
page 87).
Y
and fold up luggage com-
2
2 by tab 1.
Loading and stowing
Through-loading feature in the rear
bench seat* (Saloon)
The left-hand and right-hand rear seats can
be folded down to increase the boot capacity.
If you are transporting a long load, you can
remove the rear bench seat cushions
( page 197).
Y
G Risk of injury
Do not carry heavy or hard objects inside
the vehicle or in the boot unless they are
secured. Vehicle occupants could be
injured by objects being thrown around in
the vehicle in the event of:
sharp braking
R
a change of direction or
R
an accident
R
G Risk of poisoning
Always drive with the boot lid closed.
Exhaust fumes could otherwise enter the
vehicle interior.
Folding the rear bench seat forwards
! The seat cushion must always be released
and folded up before the backrest is folded
Controls
Z
195