Mercedes-Benz E 2008 Series Owner's Manual page 90

mkalafa,
Folding out the folding bench seat
Backrest release handle
1
Seat cushion release handle
2
Make sure that the backrests of the rear
X
bench seat are locked in the upright posi-
tion.
i
You can move the rear bench seat back-
rest to a more upright position in order to
be able to sit more comfortably on the fold-
ing bench seat ( page 198).
Y
Move the handle for the combined luggage
X
cover and net upwards (
Pull release handle 1 and fold the back-
X
rest of the folding bench seat upwards.
Version: 2.9.4
Seat belt retainers
3
Hook the seat belts into retainers 3.
X
Pull release handle
X
bench seat cushion into the sitting posi-
tion.
Push down the seat cushion until the back-
X
rest engages fully.
Fold the head restraints upwards.
X
Fitting and removing the seat cushion
i
You must remove the seat cushion if you
page 201).
wish to lift the luggage compartment floor,
Y
e.g. if the vehicle has a flat tyre.
Seat guides
1
Seat cushion
2
To remove: fold seat cushion
X
2 and fold the folding
and remove it from seat guides 1.
Controls
Seats
2 upwards
Z
87