Mercedes-Benz E 2008 Series Owner's Manual page 138

mkalafa,
Press the è or · button to select the
X
Settings... menu.
Press the j button to call up the selec-
X
tion of submenus.
Press the æ or ç button to select the
X
Time/Date submenu.
Setting the time
Use the j button to select Clock,
X
hours Press R to confirm (or Clock,
minutes Press R to confirm).
Press the æ or ç
X
value.
Press the reset button on the left of the
X
instrument cluster.
The set time is stored.
Setting the date
Press the j button to select Set date
X
Day (or Set date Month or Set date
Year).
Press the æ or ç
X
values.
Press the j, è or
X
select a different display.
Version: 2.9.4
Setting constant headlamp mode
If you have set constant headlamp mode and
the light switch is in position
the side lamps, dipped-beam headlamps and
licence plate lighting are switched on auto-
matically when the engine is running. Turning
the light switch to a different position
switches on the corresponding lights. Make
sure that the light switch is turned to
U if you switch off constant headlamp
mode while driving in the dark.
In countries in which constant headlamp
button to set a
mode is a legal requirement, Constant is the
factory setting.
Press the
X
Settings... menu.
Press the
X
tion of submenus.
Press the
X
Lighting submenu.
Press the
X
mode.
button to set the
ÿ button to
M or U,
B or
è or · button to select the
j button to call up the selec-
æ or ç button to select the
j button to select Headlamp
On-board computer
Press the æ or ç button to set the
X
mode for the headlamps to Manual or Con-
stant (constant headlamp mode).
Press the j, è or ÿ
X
select a different display.
Switching the surround lighting on or
off
If the surround lighting is switched on, the
following lights will be switched on automat-
ically in the dark after you have unlocked the
vehicle using the key:
the side lamps
R
the tail lamps
R
the licence plate lighting
R
the front foglamps
R
The surround lighting switches off automati-
cally if you open the driver's door or after 40
seconds.
Press è or · to select the Set-
X
tings... menu.
Press the j button to call up the selec-
X
tion of submenus.
Press the æ or ç button to select the
X
Lighting submenu.
Controls
button to
Z
135