Removing A Ubox Psu - Dell S5000 Series Customer Service Manual

4.1.1.

Removing a UBox PSU

Important If redundancy rules are followed, a UBox Power Supply
Required Tools
None
Procedure
1. Unpack the new component on a clean ESD-protected work surface
2. Open the cabinet rear door
3. Pull the latch of the UBox PSU up
4. Take hold of the handle (A) and remove the UBox PSU
4-2 Customer Service Guide
Unit (PSU) is hot-pluggable. It can be replaced when the
OS is running without causing any interruption in
production.