1.3.2.
Installing a Memory Module
Important Before replacing a DCPMM memory module configured in
Required Tools
None
Procedure
1. Take hold of the new component
2. Install the memory module
Important Always hold the module by the edges to avoid electrical
1. Make sure that the retention latches (A) at both ends of the memory
module connector are pushed outward to the open position.
2. Carefully push down on each side of the memory module until it sits in the
slot and the retention latches (A) close.
1-24
Customer Service Guide
Application Direct mode, back up the data present on the
memory module, as you would with any other disk.
and structural damage.