Fixed Mounting (Optional); Repositioning Handle - Graco GH833 Instructions Manual

Fixed Mounting (optional)

To prevent damaging the unit when transporting it in
a truck or on a trailer, Graco recommends fixed
mounting to the vehicle.

Repositioning Handle

Before you can secure the unit to a truck or trailer bed,
you must reposition the handle.
1. Using a phillips screwdriver, remove the handle
sleeve screws (4).
2. Remove handle assembly by pulling it out of upper
frame handle tubes.
3. Remove frame tube plugs (2) located behind the
wheels.
2
4. Insert plugs in upper frame handle tubes.
5. Insert handle assembly into lower frame tubes. The
handle
upper
frame
handle
tubes
6. Install sleeve screws (4) in lower frame tubes.
plugs
upper frame handle
tubes
hose bracket should face down. Adjust to
appropriate in/out location.
lower frame tubes
plugs
handle
311493A