Removing Handle
Fixed Mounting (optional)
To prevent damaging the unit when transporting it
in a truck or on a trailer, Graco recommends fixed
mounting to the vehicle.
Repositioning Handle
Before you can secure the unit to a truck or trailer bed,
you must reposition the handle.
1. Remove four handle sleeve screws (143).
2. Pull handle assembly (25) out of upper frame tubes
(1).
30
3. Remove frame tube plugs (120) located behind the
4. Insert plugs (120) in upper frame handle tubes (a).
143
5. Insert handle assembly (25) into lower frame tubes
25
1
6. Install sleeve screws (143) in lower frame tubes.
wheels.
(a)
(b). The hose bracket should face down. Adjust to
appropriate in/out location.
(b)
143
Removing Handle
120
120
(b)
25 25
311283H