Table Of Contents - Gemini 823 Installation And Use Manual
Hide thumbs
Also See for 823:
- Installation and use manual (16 pages) ,
- Installation and use manual (8 pages)
Table of Contents
Advertisement
UK
TABLE OF CONTENTS
1.0
- INTRODUCTORY NOTE............................................................................................
USER MANUAL
2.0
- SYSTEM OPERATION...............................................................................................
2.1 - System total arming..................................................................................................
2.2 - System partial arming...............................................................................................
2.3 - Passive arming.........................................................................................................
2.4 - Arming delay.............................................................................................................
2.5 - System armed..........................................................................................................
2.6 - Alarm, inhibit time between alarms and alarm cycles..............................................
2.7 - System disarming.....................................................................................................
2.8 - Emergency disarming by override key......................................................................
2.9 - Alarm memory...........................................................................................................
3.0
-
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT........................................
4.0
- CONNECTOR PINOUTS............................................................................................
5.0
- WIRING DIAGRAM.....................................................................................................
6.0
-
TURN INDICATORS CONNECTIONS..................................................
..........................................................................................
6.3 - Connections to Hazard switch..................................................................................
7.0
- SELECTABLE CONNECTIONS TO ARM/DISARM THE SYSTEM............................
7.1 - Connection to door lock motors with separate radio receiver...................................
7.2 - Connections to door lock motors with power door lock switch.........................
7.3 - Connection to turn indicators....................................................................................
8.0
- LEARN TURN INDICATOR FLASHES.......................................................................
9.0
-
SYSTEM PROGRAMMING................
9.1 - Optical signals..................
........................................................................................
9.2 - Acoustic signals...............................
9.3 - Passive arming.........................................................................................................
9.4 - Boot switch polarity selection...................................................................................
or self-powered siren......................................................................
10.0
- SYSTEM PROGRAMMING EXAMPLE......................
11.0
-
DIP-SWITCH SETTINGS..........................................................................................
12.0
.........................................................................................
13.0
- PROGRAM NEW DEVICES............
14.0
-
15.0
RESET..........
............................................................................................
16.0
- TECHNICAL SPECIFICATIONS...............................................................................
PAGE 02
.....................
..........................................................
....................................
....................................
.........................................................................
..................
..............................................
..........................................................
..........................................................................
.........................................................................
..................................................................
Dear Customer, th
PAGE 03
electrical connections etc. will therefore apply to all models. Before installing, identify your alarm
model and refer to it for the correct instructions
PAGE 03
822:
same as 823 without self-powered battery.
PAGE 03
The following signs are used throughout the manual to emphasize important instructions or special
PAGE 03
information:
PAGE 03
PAGE 03
PAGE 04
PAGE 04
PAGE 04
PAGE 04
This sign indicates that the system will work according to the connections and the
PAGE 04
!
PAGE 05
PAGE 06
PAGE 07
PAGE 08
PAGE 08
Press the lock button on the vehicle original remote control
PAGE 08
(selectable feature) and a flash of the turn indicators.
PAGE 08
The system has a 30 sec. arming delay during which the LED is ON steady.
PAGE 09
PAGE 09
........
PAGE 09
The system can be armed without activating the volumetric protection, the external sensors (infrared
PAGE 09
wireless) and the comfort feature. To exclude these features proceed as follows:
PAGE 09
!
Disarm the alarm system and turn ignition key OFF
PAGE 10
!
Open the driver door, touch the override key to its receptacle, c
PAGE 10
button on the vehicle original remote control
PAGE 10
PAGE 10
PAGE 10
PAGE 10
PAGE 10
PAGE 11
PAGE 11
When passive arming is enabled, the system automatically arms approx. 60 sec. after ignition is
PAGE 12
switched OFF and the last door is opened and closed. Arming is confirmed by a Beep (selectable
PAGE 12
PAGE 12
PAGE 12
When the system arms passively, interior protection and comfort output (automatic
PAGE 13
PAGE 14
Opening a door during the 60 sec. arming countdown will cause the procedure to
PAGE 15
1.0 - INTRODUCTORY NOTE
e present manual illustrates the most fully featured alarm system; not all functions,
.
For the user.
This sign highlights useful information.
For the installer.
programming selected or it simply provides useful installation tips.
USER MANUAL
2.0 - SYSTEM
OPERATION
2.1 -
SYSTEM TOTAL ARMING
2.2 -
SYSTEM PARTIAL ARMING
.
.
Exclusion is bound to each single arming cycle.
2.3 -
PASSIVE ARMING
feature) and a flash of the turn indicators..
window roll-up) are excluded.
interrupt; it will resume once the door is closed.
. System arming is confirmed by a Beep
lose the door and press the lock
USER MANUAL - PAGE 03
Advertisement
Table of Contents
