Chapter 3. Quick Installation Guide; Tcp/Ip Configuration; Quick Installation Guide - TP-Link TL-MR3420 User Manual

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your 3G/4G Wireless N router
using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default IP address of the 3G/4G Wireless N router is 192.168.0.1. And the default Subnet
Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all
the default values for description.
Connect the local PC to the LAN ports of the router. And then you can configure the IP address
for your PC in the following two ways.
Configure the IP address manually

1) Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this,
please refer to Appendix B: Configuring the PC
2) Configure the network parameters. The IP address is 192.168.0.xxx ("xxx" is any number
from 2 to 254), Subnet Mask is 255.255.255.0, and Gateway is 192.168.0.1 (The router's
default IP address)
Obtain an IP address automatically

1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If
you need instructions as to how to do this, please refer to
2) Then the built-in DHCP server will assign IP address for the PC.

3.2 Quick Installation Guide


Note:
If you are trying to connect to TL-MR3420 wirelessly, please refer to the label on the bottom of
the router for the Wireless Password.
1. To access the configuration utility, open a web browser and type in the default address
http://tplinkwifi.net
After a moment, a login window will appear, similar to the figure below. Enter admin for the User
Name and Password, both in lower case letters. Then click the OK button or press the Enter
key.
TL-MR3420
in the address field.
3G/4G Wireles N Router User Guide
Appendix B: Configuring the PC
-7-