United Kingdom Conformity According To Statutory Instrument Si 2017/1206 - Panasonic PAN1782 Product Specification


PAN1782 Bluetooth Module
The requirements for CE marking are described in regulation (EC) No. 765/2008
Annex II.
The end customer has to assure that the device has a distance of more than
5 mm from the human body under all circumstances.
If the end customer application intends to use the PAN1782 in a distance
smaller 5 mm from the human body, SAR evaluation has to be repeated by the
OEM.
The end customer equipment must meet the actual Safety/Health requirements
according to RED.
PAN1782 and its model versions in the specified reference design can be used in all countries
of the European Economic Area (Member States of the EU, European Free Trade Association
States [Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra, and Turkey.
6.5 United Kingdom Conformity According to Statutory Instrument
SI 2017/1206
All modules described in this Product Specification comply with the designated standards
according to the following Regulations: Electrical Equipment (Safety) SI 2016/1101, EMC SI
2016/1091 together with Radio Equipment Regulation 2017 (RER) SI 2017/1206:
Safety/Health:
EMC:
Radio:
•
Due to the model size, the UK marking is displayed in the installation instruction only and
it cannot be displayed conform to SI 2017/1206 on the module's label due to the limited
space.
•
The RED EU Type Examination Certificate No. T818987P-01 issued by the EU Notified
Body 0682 can be used for the OEM end product conformity assessment. If a Notified
Body has been contracted for the end product conformity assessment, it should be noted
that this EU Type Examination Certificate should be used for conformance assessment.
As a result of the conformity assessment procedure described in SI 2017/1206 Directive, the
end customer equipment should be labelled as follows:
Product Specification Rev. 1.0
EN 62368-1: 2014/AC: 2015/A11: 2017 EN 62479: 2010
EN 301 489-1 V2.2.3: (2019-11)
EN 301 489-17 V3.2.2: (2019-02)
EN 300 328 V2.2.2: (2019-07)
6 Regulatory and Certification Information
Page 39 of 42