Panasonic PAN1782 Product Specification page 34


PAN1782 Bluetooth Module
6.2.3 Label Requirements
The OEM must ensure that FCC labelling requirements are met. This includes
a clearly visible label on the outside of the OEM enclosure specifying the
appropriate Panasonic FCC identifier for this product as well as the FCC
Notice above.
The FCC identifier is FCC ID: T7V1782
This FCC identifier is valid for the PAN1782. The end product must in any
case be labelled on the exterior with:
"Contains FCC ID: T7V1782".
Due to the PAN1782 model size, the FCC identifier is displayed on the product package and in
the installation instruction only. It cannot be displayed readable on the module's label due to the
limited size.
6.2.4 Antenna Warning
This antenna warning refers to the test device with the model number PAN1782
Information.Ordering
The device is tested with a standard SMA connector and with the antenna listed below. When
integrated into the OEM's product, these fixed antennas require installation preventing end
users from replacing them with non-approved antennas. Any antenna not in the following table
must be tested to comply with FCC Section 15.203 for unique antenna connectors and with
Section 15.247 for emissions. The FCC identifier for the device with the antenna listed in
 6.2.5 Approved Antenna List
6.2.5 Approved Antenna List
Item Part Number
1 ANT016008LCS2442MA1 TDK
Product Specification Rev. 1.0
Information
is the same (FCC ID: T7V1782).
Manufacturer
6 Regulatory and Certification Information
Frequency Band Type
(GHz)
2.4 Chip antenna
 7.1 Ordering
Max. Gain
(dBi)
+1
Page 34 of 42