European Conformity According To Red (2014/53/Eu) - Panasonic PAN1782 Product Specification


PAN1782 Bluetooth Module
French
Obligations d'étiquetage
Les fabricants d'équipements d'origine (FEO) – en anglais Original Equipment
Manufacturer (OEM) – doivent s'assurer que les obligations d'étiquetage IC du
produit final sont remplies. Ces obligations incluent une étiquette clairement
visible à l'extérieur de l'emballage externe, comportant l'identifiant IC du
module Panasonic inclus, ainsi que la notification ci-dessus.
L' identifiant IC est IC: 216Q-1782
Cet identifiant est valide pour tous les modules PAN1782
Information. Dans tous les cas les produits finaux doivent indiquer sur leur
emballage externe la mention suivante:
"Contient IC: 216Q-1782".

6.4 European Conformity According to RED (2014/53/EU)

All modules described in this Product Specification comply with the standards according to the
following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles:
3.1a Safety/Health:
3.1b EMC:
3.2 Radio:
•
Due to the model size, the CE marking is displayed on the product package and in the
installation instruction only. It cannot be displayed conform to regulation (EU)
No. 765/2008 in 5 mm height on the module's label due to the limited space.
•
The RED EU Type Examination Certificate No. T818987P-01 issued by the Notified
Body 0682 can be used for the OEM end product conformity assessment. If a Notified
Body has been contracted for the end product conformity assessment, it should be noted
that this EU Type Examination Certificate should be used for conformance assessment.
As a result of the conformity assessment procedure described in 2014/53/EU Directive, the end
customer equipment should be labelled as follows:
Product Specification Rev. 1.0
EN 62368-1: 2014/AC: 2015/A11: 2017/AC:2017
EN 62479: 2010
EN 301 489-1 V2.2.3: (2019-11)
EN 301 489-17 V3.2.4: (2020-09)
EN 300 328 V2.2.2: (2019-07)
6 Regulatory and Certification Information
 7.1 Ordering
Page 38 of 42