Table of Contents
Advertisement
PAN1782 Bluetooth Module
5.3 Usage Condition Notes
1. Take measures to protect the module against static electricity.
If pulses or transient loads (a large load, which is suddenly applied) are applied to the
modules, check and evaluate their operation before assembly of the final products.
2. Do not use dropped modules.
3. Do not touch, damage, or soil the pins.
4. Follow the recommended condition ratings about the power supply applied to this
module.
5. Electrode peeling strength: Do not apply a force of more than 4.9 N in any direction on
the soldered module.
6. Pressing on parts of the metal cover or fastening objects to the metal cover will cause
damage.
7. These modules are intended for general purpose and standard use in general electronic
equipment, such as home appliances, office equipment, information, and communication
equipment.
5.4 Storage Notes
1. The module should not be stressed mechanically during storage.
2. Do not store these modules in the following conditions or the performance characteristics
of the module, such as RF performance will be adversely affected:
–
Storage in salty air or in an environment with a high concentration of corrosive gas,
such as Cl
–
Storage in direct sunlight,
–
Storage in an environment where the temperature may be outside the range of 5 °C
to 35 °C, or where the humidity may be outside the 45 % to 85 % range,
–
Storage of the modules for more than one year after the date of delivery storage
period: Please check the adhesive strength of the embossed tape and soldering
after 6 months of storage.
3. Keep this module away from water, poisonous gas, and corrosive gas.
4. This module should not be stressed or shocked when transported.
5. Follow the specification when stacking packed crates (max. 10).
5.5 Safety Cautions
These specifications are intended to preserve the quality assurance of products and individual
components.
Before use, check and evaluate the operation when mounted on your products. Abide by these
specifications without deviation when using the products. These products may short-circuit. If
electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a
short circuit occurs, provide the following failsafe functions as a minimum:
Product Specification Rev. 1.0
, H
S, NH
, SO
, or NO
,
2
2
3
2
X
5 Cautions
Page 29 of 42
Advertisement
Table of Contents
