Panasonic PAN1782 Product Specification page 37


PAN1782 Bluetooth Module
6.3.1 IC Notice
English
The device PAN1782
( 6.2.5 Approved Antenna
The device meets the requirements for modular transmitter approval as
detailed in RSS-Gen.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
French
Le présent appareil PAN1782
compris
d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage, et
2. L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
6.3.2 Labeling Requirements
English
Labeling Requirements
The OEM must ensure that IC labelling requirements are met. This includes a
clearly visible label on the outside of the OEM enclosure specifying the
appropriate Panasonic IC identifier for this product as well as the IC Notice
above.
The IC identifier is IC: 216Q-1782
This IC identifier is valid for all PAN1782 modules
In any case, the end product must be labelled on the exterior with:
"Contains IC: 216Q-1782".
Product Specification Rev. 1.0
( 7.1 Ordering
List), complies with Canada RSS-GEN Rules.
( 7.1 Ordering
( 6.2.5 Approved Antenna
6 Regulatory and Certification Information
Information), including the antennas
Information), les antennes y
List), est conforme aux CNR-Gen
 7.1 Ordering
Information.
Page 37 of 42