Positioning Your Projector; Choosing A Location - BenQ EH620 User Manual

Positioning your projector

Choosing a location

Before choosing an installation location for your projector, take the following factors into consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
You can install your projector in the following ways.
1. Front Table
Select this location with the projector placed on
the table in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
3. Front Ceiling
Select this location with the projector suspended
upside-down in front of the screen. Purchase the
BenQ Projector Ceiling/Wall Mount Kit from your
dealer to mount your projector.
You can do one of the steps below to choose Projector Position:
1. If this is the first time you turn on the projector, the first step in setup wizard will guide you to select
a setting.
2. When the input source is BenQ Launcher, go to Settings > Display > Projector Position
and select a setting.
3. When the input source is not BenQ Launcher, go to Advanced Menu - Settings > Projector
Installation and select a setting.
2. Rear Table
Select this location with the projector placed on
the table behind the screen. Note that a special
rear projection screen is required.
4. Rear Ceiling
Select this location with the projector suspended
upside-down from behind the screen. Note that a
special rear projection screen and the BenQ
Projector Ceiling/Wall Mount Kit are required for
this installation location.
Positioning your projector 13