Operation (Under Non-Launcher Source); Using The Projector Menus Under Non-Launcher Source - BenQ EH620 User Manual

Operation (under non-Launcher source)

Using the projector menus under non-Launcher source

When the input signal is HDMI 1 HDMI 2 or PC/YPbPr, you can use 2 types of On-Screen Display
(OSD) menus for making various adjustments and settings.
• Basic OSD menu: provides primary menu functions. (See
• Advanced OSD menu: provides full menu functions. (See
To access the OSD menu, press
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu items.
• Use OK on the projector or remote control to confirm the selected menu item.
The first time you use the projector (after finishing the initial setup), Basic OSD menu displays.
The OSD screenshots below are for reference only, and may differ from the actual design.
Below is the overview of the Basic OSD menu.
1
2
3
4
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the
instructions below:
1. Go to Basic Menu > Menu Type.
2. Press OK and press / to select Advanced. Next time when you turn on the projector, you
may access the Advanced OSD menu by pressing
40 Operation (under non-Launcher source)
(MENU).
5
Basic menu on page
Advanced menu on page
Menu Type
1
Main menu
2
2
Current input
3
signal
6
(MENU).
43)
45)
Press OK to enter
4
the menu.
Status
5
Press (MENU)
to go to the
6
previous page or to
exit.