Connecting The Transmitter - Panasonic TY-WPR1 Operating Instructions (Functional Manual)
Wireless presentation system for business use, wps basic set, wps transmitter, wireless presentation system receiver board, wps usb-c basic set, wps usb-c transmitter set, wps receiver, wps transmitter set, wps usb-c transmitter
Table of Contents
Advertisement
Connecting the transmitter
1
Connect the USB terminal and HDMI input terminal of the transmitter to the image
output device.
• For power supply to the transmitter, 5 V/0.9 A power supply is necessary.
For the USB-C transmitter, connect the USB terminal (Type-C) to the image output device.
Note
• The USB Type-C terminal of an image output device requires the following functions. Confirm the specifications
of the device before using.
• DisplayPort Alt Mode (image output function)
• Function to supply power to the connected device (5 V/0.9 A)
2
Main LED changes from red blinking (connecting) to white illumination (standby).
Red blinking
(connecting)
USB terminal
TY-WPB1 / TY-WPB1W
HDMI input terminal
TY-WPBC1 / TY-WPBC1W
White illumination
(standby)
English
13
13
Advertisement
Table of Contents
