Connecting The Transmitter - Panasonic PressIT TY-WPS1 Operating Instructions Manual

3
Press the power button of the receiver.
When a standby screen is displayed on the
display device, the receiver has completed
preparation.
09:40
Standby screen

Connecting the transmitter

1
Connect the USB terminal and HDMI input
terminal of the transmitter to the image
output device.
• For power supply to the transmitter, 5 V/0.9 A or
more power supply is necessary.
For the USB-C transmitter, connect the USB terminal
(Type-C) to the image output device.
2
Main LED changes from red blinking
(connecting) to white illumination (standby).
Red blinking (connecting)
USB terminal
HDMI input
terminal
White illumination
(standby)
English 9