Table of Contents
Advertisement
Setting
Continued
●
Reset to Factory Default
■
About Device
Displays [SSID], [Firmware Version], [Wireless Channel] and other basic information related to this product.
When the transmitter is connected, the basic information of the transmitter is also displayed.
■
Software licenses
Displays the software license description.
42
42
English
Initializes this product to the default state. Note that the customized language
setting, resolution setting, wireless LAN setting, etc. once stored are initialized.
(SSID is not initialized.)
When the transmitter is initialized, the paired state between the receiver
and transmitter is canceled. Perform pairing according to the procedure in
"Transmitter Extension Method (Pairing)" (page 20) after initialization.
Reset RX:
Initializes the receiver only.
Reset TX:
Initializes the transmitter only.
Initialization is applicable to active transmitters that have been paired with a
receiver.
Reset RX + TX:
Initializes both the receiver and transmitter.
Advertisement
Table of Contents
