Part Names - Panasonic TY-WPR1 Operating Instructions (Functional Manual)

Part Names

■
Receiver (TY-WPR1 / TY-WPR1W)
1
▼ Connection terminals / Controls
5 6 7
* HID device
A compatible mouse and a touch module built into the display
operate. For information of operable touch modules, see the
Panasonic information site. When using the BQ1 touch panel
to operate an externally connected device (PC), change the
settings of the BQ1 unit. (page 51)
These can be used only with one screen display. After the USB
cable of the HID device is connected, "Hid Driver loading..."
appears. When this message disappears, the device can be
used.
4
2
3
8 9 10 11
Antenna
1
FUNCTION button / LED
2
Used to save a pairing file to the USB
memory.
Indicator
3
Displays the power supply status, and
connection statuses of LAN and USB.
Screw holes for mounting bracket
4
(page 52)
Used to attach the receiver to the
mounting bracket.
▼ C onnection terminals / Controls
5 Security Slot
This security slot is compatible with a
Noble Wedge slot.
6 Power input terminal
7 Power button
Turns ON/OFF the power of the receiver.
8 Reset button
Restores the product to the factory
default state.
This is the same operation as that when
[Reset RX] is selected for [Reset to
Factory Default]. (page 42)
Reset operation starts when the reset
button is pressed for 5 seconds or
more while the power is being supplied.
Initialization will be complete in approx.
1 minute.
9 USB terminal (Type-A)
Connects the transmitter or USB
memory when pairing devices.
Use this by connecting an HID device.
10 LAN terminal (RJ45)
Connects to the network to change the
settings of the product.
11 HDMI output terminal
Connects an imaging device equipped
with HDMI input.
English 9