Table of Contents
Advertisement
2.
Remove the DC fan (80 square).
(1) Disconnect the harness from the connector (CN002) on the CN-3824 board.
(2) Remove the two screws, then remove the DC fan (80 square).
PSW3 x 30
DC fan (80 square)
CN-3824 board
Note
When attaching the DC fan, pay attention to the position of label and harness.
3.
Install the removed parts by reversing the steps of removal.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
PSW3 x 30
Label
CN003
Harness
4-10
Hide quick links:
Advertisement
Table of Contents
