Dc Fan (Fan Holder Assembly (C)) (Xvs-9000) - Sony XVS-9000-C Service Manual

2. Disconnect the harness from the connector (CN003) on the CN-3824 board.
3. Open the clamper, then release the two harnesses.
4. Remove the two screws [a], then remove the DC fan (120 square) (thick type).
5. Remove the two screws [b].
6. Pull out the harness from the hole, then remove the DC fan (80 square).
DC fan(120 square) (Thick type)
[a]
PSW3 x 30
Label
CN-3824 board
CN002
Note
When attaching the DC fan, pay attention to the position of label and harness.
7. Install the removed parts by reversing the steps of removal.
4-4-4.

DC Fan (Fan Holder Assembly (C)) (XVS-9000)

XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
[b]
PSW3 x 30
[a]
PSW3 x 30
CN003
Clamper
DC fan(80 square)
[b]
PSW3 x 30
Label
Harnesses
Hole of the chassis
4-8