Connection
3.2 Connector assignment of the USB cable
Removing the cable
Proceed as follows to remove the cable from the device:
1. Insert a paper clip into the opening on the side of the device handle.
2. Remove the cable carefully from the device.
3.2
Connector assignment of the USB cable
USB cable
Example with connector assignments:
Figure 3-1
Table 3- 1
Connector A
1
2
3
4
Housing
Description of the connector assignment of the optical handheld reader (Page 15).
14
USB cable with pin assignment
Connector table
Designation
VIN
DM
DP
GND
-
Wire
Color
24 AWG
Red
28 AWG
White
28 AWG
Green
24 AWG
Black
Shield
Blank
Operating Instructions, 03/2021, C79000-G8976-C643-01
Connector B
1
2
3
10
Housing
SIMATIC MV320 (as of FS: A3)