Connection Variants; Connecting A Usb Device To The Ifp - Siemens IFP V2 UL Operating Manual

Installing and connecting the device
3.5 Connecting the device
3.5.5.2

Connection variants

"Commissioning" mode
If you want to commission an Ethernet Monitor or change the network parameters of an
Ethernet Monitor with the "PDT" software, connect the Ethernet Monitor and IPC in the
"Commissioning" mode as follows:
1. Connect the Ethernet Monitor and PC with a USB cable.
2. Connect the Ethernet Monitor and PC with a DisplayPort cable. Maximum
3. Connect the Ethernet Monitor and PC with an Ethernet cable.
"Ethernet" mode
After commissioning, connect the Ethernet Monitor to the PC via LAN. Cable
lengths or distances according to conventional LAN technology apply.
3.5.6

Connecting a USB device to the IFP

You can connect the following industrial grade devices to the USB ports of the IFP, for
example:
• Mouse
• Keyboard
• USB storage media
44
Maximum cable length: 5 m
cable length: 5 m
USB Type B
DisplayPort
Ethernet
IFP V2 UL hazardous information
Operating Manual, 11/2023