Program Mode; Program Sequence And Default Settings; Function Keys; Setting The Lcd Contrast - La Crosse Technology WS-9065TWC Instruction Manual

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or the CH button is pressed
during the programming mode, the unit will confirm/set the last information
entered—the display will stop flashing and return to normal time-date readings. If
you don't leave the program mode during the programming of sections IV through
XI, you can advance to step 4 of the next program setting. If you do leave the
program setting (or want to program a specific setting) follow each instructional
step to program that setting.
I. PROGRAMMING SEQUENCE AND DEFAULT SETTINGS
Please note that while there is a snooze adjustment in the programming this is an
unused function as there is no alarm on the indoor weather station.
II.

FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD.
III.

SETTING THE LCD CONTRAST

The programming sequence and default (factory) settings are as follows:
LCD Contrast
Time Zone
Daylight Saving Time
Radio-controlled time reception
12/24-hour time
Time
Year
Day and Month
Snooze (this function not used)
Temperature Format
Forecast Sensitivity
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the time LCD and the number setting will flash.
Note: There are 8 LCD contrast levels to choose from—"Lcd 0" is the
lightest, and "Lcd 7" is the darkest.
3. Press and release the IN button to select the level you desire.
5
-5 (Eastern)
1 (on)
ON
12
12:00
2003
1.1.
10
°F
2
6