Advertisement
Advertisement
Related Manuals for La Crosse Technology The Weather Channel WS-9005TWC
Summary of Contents for La Crosse Technology The Weather Channel WS-9005TWC
- Page 1 WS-9005TWC 915MHz WIRELESS RAIN GAUGE INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
CONTENTS introduction features setting up function keys operations mounting maintenance specifications liability disclaimer warranty information... -
Page 3: Features
Thank You and Congratulations on your purchase of this innovative Wireless Rain Gauge for display of rainfall data through a wireless rainfall sensor. With 2 easy to use function keys, this unique product is perfect for gardeners and weather buffs alike. This product offers: Wireless Rain Gauge (Receiver) Light Rain &... - Page 4 Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries. 1. Have the receiver and the rain gauge 3 to 5 feet apart. 2. Place the batteries into the rain gauge FIRST and next into the receiver. Observing the correct polarization, insert 2 “AAA” Alkaline Batteries into the compartment at the back of the rain gauge and replace the cover.
- Page 5 3. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES. 4. All segments of the LCD will light up briefly. Then 0.00 inch will be displayed in both sections of the LCD If the “0.0” is not displayed after a few seconds, remove the batteries and wait for at least 10 seconds before reinserting them.
-
Page 6: Function Keys
Battery Change: It is recommended to replace the batteries in the unit approximately every 3 years to ensure optimum accuracy. FUNCTION KEYS The simple design of this product features 2 keys. RESET/+ Key: • Press for 5 seconds to reset the TOTAL rainfall data “0”. •... -
Page 7: Mounting
Light Rain/Heavy Rain Indicator The wireless rain gauge features 2 rain level indicators: Light Rain and Heavy Rain. Low Battery Indicators (RX & TX) • RX: Indicates the receiver battery is low. • TX: Indicates the rain gauge battery is low. MOUNTING Positioning the Receiver: The Receiver can be positioned on a flat surface or on a wall. -
Page 8: Maintenance
Positioning the Rain Gauge Position the connected rain gauge outdoor to collect rainfall data. Ensure that the rain gauge is placed in a secure and flat location where it can properly collect properly rain quantity without obstruction. Ensure also that the rain gauge is securely mounted at the appropriate location otherwise it may not transmit accurate rainfall data. -
Page 9: Specifications
solvents or scouring agents as they may mark the casing and LCD. Do not submerge the Wireless Rain Gauge in water. Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. Please do not make any attempt to make any repairs to the units. -
Page 10: Warranty Information
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. - Page 11 State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610...