Care And Maintenance - La Crosse Technology WS-9031U Instruction Manual

POSITIONING THE THERMO-HYGRO TRANSMITTER:
Each transmitter is supplied with 2 wall mounting screws and plastic anchors.
To wall mount simply:
Note:
Before permanently fixing the transmitter wall base, pace all units in the
desired locations to check that the outdoor temperature and humidity readings
are receivable. In event that the signal is not received, relocate the
transmitters or move them slightly as this may help the signal reception.

CARE AND MAINTENANCE:

•
Extreme temperatures, vibration and shock should be avoided as these
may cause damage to the units and give inaccurate forecasts and
readings.
•
When cleaning the display and casings, use a soft damp cloth only. Do
not use solvents or scouring agents as they may mark the LCD and
casings.
1. Secure the wall base onto
a desired wall using the
screws and plastic anchors.
2. Insert the transmitter to the
wall base.