TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
PROJECTION STATION
TO INSTALL AND REPLACE BATTERIES IN THE THERMO-
HYGRO TRANSMITTER
The Thermo-hygro transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install
and replace the batteries, please follow the steps below:
1.
Remove the battery cover.
The Weather Projection Station uses 3 x AA,
IEC LR6, 1.5V batteries. To install and
replace the batteries, please follow the steps
below:
1.
Insert finger or other solid object in
the space at the bottom center of the
battery compartment and lift up to
remove the cover.
2.
Insert batteries observing the correct
polarity (see marking).
3.
Replace compartment cover.